The level of flood control pumps in a pump-typeSAPC_TSCM62_64exam(double suction pump) Main parts material: SAP-type pump in the open flow components are made of cast iron, such as user needs, the impeller can also be cast steel and brass, subject to the contract in order on the state. In addition to 48SAP-30 pump for the sliding bearings, pump bearings are used other models rolling bearings, bearing cover sealed with oil seal.6MPa.
Also be based on end user requirements will drive the move to the other side of the pump, this time, steering and inhalation, and the outlet are the opposite direction.SAP-based system level single-stage double-suction centrifugal pumps in the open, suitable for factories, cities, mines, power stations, farmland, water conservancy and other fields. For the delivery of solid particles in water or physical and chemical properties similar to water, other liquids, is the transmission medium temperature 0 ℃ ~ 80 ℃, the maximum allowed inlet pressure 0.
The level of flood control pumps in a pump-type SAP (double suction pump) of the rotation direction: to pump from the motor to look for the counterclockwise rotation, the intake on the left and the right outlet. The level of flood control pumps in a pump-typeSAPC_TSCM62_64exam(double suction pump) structure type: the pump is horizontal installation, the pump casing at the level of the axis line to separate the upper part of the pump cover, the lower part of the pump body, inlet and outlet are the pump axis bottom of the pump body, its center line with the axis perpendicular to repair water and outlet pipe is not required to remove road, finger sprayer Factory you can uncover the pump cover, remove the rotor components. Seal soft packing seal and mechanical seal.